• Var vänlig klipp och klistra in felmeddelandet du ser på skärmen, om något.

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• Varsågod och förklara vad du ville göra, vad du gjorde och vad som hände

I tried reloading the game, but interface options were unchanged.

• Vad har du för webbläsare?

• Var vänlig kopiera/klistra in texten på engelska istället för ditt eget språk. If you have a screenshot of this bug (good practice), you can use a picture hosting service of your choice (snipboard.io for example) to upload it and copy/paste the link here. Är denna text tillgänglig i översättningssystemet? I så fall, var det mer än 24 timmar sedan den översattes?

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• Vad har du för webbläsare?

• Vänligen förklara ditt förslag exakt och koncist så att det är så enkelt som möjligt att förstå vad du menar.

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• Vad har du för webbläsare?

• Vad visades på skärmen när du blockerades (Blank skärm? Del av spelets användargränssnitt? Felmeddelande?)?

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• Vad har du för webbläsare?

• Vilken del av reglerna respekterades inte av BGA-adaptionen?

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• Är regelbrottet synligt i återuppspelning? Om ja, vilket nummer är det på draget?

I tried reloading the game, but interface options were unchanged.

• Vad har du för webbläsare?

• Vilken spelhandling ville du göra?

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• Vad försöker du göra för att sätta igång denna spelmekaniken?

I tried reloading the game, but interface options were unchanged.

• Vad hände när du försökte göra det här (felmeddelande, meddelande i spelstatusrad, ...)?

n/a

• Vad har du för webbläsare?

• På vilket steg i spelet kom felet (vad var den aktuella instruktionen från spelet)?

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• Vad hände när du försökte utföra en spelhandling (felmeddelande, meddelande i spelstatusrad, ...)?

I tried reloading the game, but interface options were unchanged.

• Vad har du för webbläsare?

• Vänligen beskriv visningsproblemet. If you have a screenshot of this bug (good practice), you can use a picture hosting service of your choice (snipboard.io for example) to upload it and copy/paste the link here.

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• Vad har du för webbläsare?

• Var vänlig kopiera/klistra in texten på engelska istället för ditt eget språk. If you have a screenshot of this bug (good practice), you can use a picture hosting service of your choice (snipboard.io for example) to upload it and copy/paste the link here. Är denna text tillgänglig i översättningssystemet? I så fall, var det mer än 24 timmar sedan den översattes?

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• Vad har du för webbläsare?

• Vänligen förklara ditt förslag exakt och koncist så att det är så enkelt som möjligt att förstå vad du menar.

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• Vad har du för webbläsare?